EAN Check.comEAN Check.com

Freight Class Calculator

The carrier wants a freight class on the bill of lading, and you have a pallet, a scale and a tape measure. Type the size and the weight. The calculator gives the LTL freight class, a number from 50 to 500, and the density behind it.

By The eancheck teamPublished

Size in
Weight in

Measure the outside of each piece, with the pallet.

Line 1
One line for each size of pallet, crate or carton.
The class, the density and the working show here when one line is complete.

Using an AI assistant?

How to measure · When density does not set the class · The freight class chart

Freight class is a number from 50 to 500

A freight class is a number from 50 to 500 that tells a US carrier how hard a shipment is to move, and so what to charge for it. It is used for less-than-truckload (LTL) freight: pallets, crates and cartons that share a trailer with other shippers' goods. FedEx Freight counts 18 classes, numbered 50 to 500, and says a lower class number generally means a lower shipping cost.

The classes are in the National Motor Freight Classification (NMFC), which the National Motor Freight Traffic Association (NMFTA) publishes. NMFTA bases a class on four things: density, handling, stowability and liability. Density is how heavy the freight is for the space it takes. The other three are how easy it is to move across a dock, how well it stows in a trailer, and how likely it is to be damaged or to damage other freight.

For goods with no handling, stowability or liability problem, density sets the class on the standard scale. A pallet of steel fittings and a pallet of empty plastic bottles fill the same floor space in the trailer. The bottles weigh far less for the same space, so they get a higher class.

How to calculate freight class from density

Multiply length, width and height in inches, then divide by 1 728 to get cubic feet. Divide the weight in pounds by the cubic feet to get the density. Look that density up on the NMFC scale: 9.38 lb per cubic foot, for example, is class 100.

Density in lb per cubic foot = weight in lb ÷ (length × width × height in inches ÷ 1 728)

The density in pounds per cubic foot, often written PCF, is the figure a freight density calculator gives and the one the class scale uses. Take a pallet that measures 48 by 40 by 48 in and weighs 500 lb, the first example in the calculator:

StepWorkingResult
Volume in cubic inches48 × 40 × 4892 160
Volume in cubic feet92 160 ÷ 1 72853.33
Density in lb per cubic foot500 ÷ 53.339.38
Class8 but less than 10100

The 1 728 is the number of cubic inches in a cubic foot: 12 × 12 × 12. For a shipment of several pieces, add the cubic feet of all pieces, add the pounds, and divide the two totals. The calculator does this when you add a line, and it also shows the class each line would have by itself.

Under the class, the calculator says what would reach the next one. For this pallet, class 92.5 starts at 10 lb per cubic foot. That is 33.4 lb more on the same pallet, or a load 3 in lower at the same weight. To try the second, restack the load lower and measure it again.

Freight class chart: the 13 density steps since 19 July 2025

The density scale has 13 steps and has been in force since 19 July 2025. It is the scale the calculator uses. The rows are the ones ArcBest publishes as the 13-tier NMFC density scale, and Estes and FedEx Freight print the same 13 classes. A density on a boundary belongs to the denser row: exactly 10 lb per cubic foot is class 92.5.

Density in lb per cubic footFreight class
Less than 1400
1 but less than 2300
2 but less than 4250
4 but less than 6175
6 but less than 8125
8 but less than 10100
10 but less than 1292.5
12 but less than 1585
15 but less than 22.570
22.5 but less than 3065
30 but less than 3560
35 but less than 5055
50 or greater50

Before 19 July 2025 the scale had 11 steps. The change came under NMFTA Docket 2025-1 and made it 13, and the two new classes, 50 and 55, are for heavy, dense products: class 55 starts at 35 lb per cubic foot and class 50 at 50 lb per cubic foot. Five of the 18 classes are not on the scale at all. Classes 77.5, 110, 150, 200 and 500 exist only where the NMFC item for the goods names them.

A pallet of 48 by 40 by 48 in holds 53.33 cubic feet, so each class starts at a fixed weight. The weights below are the scale times the exact volume, 92 160 ÷ 1 728 = 53.3333 cubic feet, rounded up to the next hundredth of a pound, so the first weight in each row reaches the class.

Freight classWeight of a 48 by 40 by 48 in pallet
400under 53.34 lb
30053.34 lb to under 106.67 lb
250106.67 lb to under 213.34 lb
175213.34 lb to under 320.00 lb
125320.00 lb to under 426.67 lb
100426.67 lb to under 533.34 lb
92.5533.34 lb to under 640.00 lb
85640.00 lb to under 800.00 lb
70800.00 lb to under 1 200.00 lb
651 200.00 lb to under 1 600.00 lb
601 600.00 lb to under 1 866.67 lb
551 866.67 lb to under 2 666.67 lb
502 666.67 lb or more

Measure the freight the way the carrier will

Measure the finished piece, not the product. That means the longest, widest and tallest points of the pallet as it stands on the dock, with the pallet itself, the overhang and the packaging. Estes says to include the height of the pallet in the total height, and FedEx Freight says to include the pallet when you weigh. Measure again after the stretch wrap and the bands are on, because that is the piece the driver collects.

Do not round a size down. A carton that leans 1 in past the pallet edge makes the pallet 1 in longer, and on a 48 by 40 by 48 in pallet at 500 lb that inch moves the density from 9.38 to 9.18 lb per cubic foot. Near a boundary it changes the class.

The carrier can check. Estes writes that it may reweigh and dimension the freight after pickup to verify the density, and ArcBest warns that a reweigh or remeasurement that changes the class can lead to additional fees and delays. FedEx Freight says a wrong class is usually caught when the shipment is inspected, and the class and the shipping rates are then adjusted.

When density does not set the class

The calculator answers one question: which class does this density have on the standard scale? Three cases need more than that.

The goods have their own NMFC item

Some goods have an NMFC item that sets their class, whatever their density. Fragile or valuable goods are the liability case and can be among them. NMFTA describes liability as how likely the freight is to cause damage or be damaged, and FedEx Freight lists the value of the goods and whether extra security precautions are needed.

The 3PL Guys class list names tyres and bathroom fixtures at class 77.5 and mattresses at class 200, none of which the density scale can give. Estes asks shippers to identify each commodity and its classification on the bill of lading. The item numbers are in ClassIT+, the official digital version of the NMFC.

One pallet holds goods of different classes

FedEx Freight gives the rule for its own shipments: when items with different classes ship on the same pallet, the shipment defaults to the highest class of those items. Its example is car accessories at class 60 with car covers at class 100, where the whole pallet is class 100. The "Class by itself" column in the calculator shows which line that would be.

The freight is a drum or a roll

The calculator works with boxes: length times width times height. For a drum, a roll or a reel, the Estes page has a second calculator for cylindrical freight.

Frequently asked questions

How do you calculate freight class?

Divide the weight by the volume. Multiply length, width and height in inches and divide by 1 728 to get cubic feet. Divide the weight in pounds by that figure. The result is the density in pounds per cubic foot, and the NMFC density scale gives its class. A pallet of 48 by 40 by 48 in at 500 lb is 53.33 cubic feet, 9.38 lb per cubic foot, class 100.

What is class 70 freight?

Class 70 is freight with a density of 15 but less than 22.5 lb per cubic foot on the NMFC density scale. A crate of 36 by 24 by 24 in holds 12 cubic feet, so it is class 70 from 180 lb to under 270 lb. The 3PL Guys list packaged food, engines and machinery on skids as typical class 70 goods.

What does freight class 300 mean?

Class 300 means light, bulky freight: a density of 1 but less than 2 lb per cubic foot. A pallet of 48 by 40 by 72 in holds 80 cubic feet, so it is class 300 from 80 lb to under 160 lb. FedEx Freight says a lower class number generally means a lower shipping cost, so class 300 is towards the costly end.

What is class 500 freight?

Class 500 is the highest of the 18 freight classes, and density alone never gives it. The density scale stops at class 400, for freight under 1 lb per cubic foot. Class 500 is set by the NMFC item for the goods. The 3PL Guys give ping-pong balls and bags of feathers as examples.

Does the pallet count in the size and the weight?

Yes, both. FedEx Freight says to include the pallet or other packaging when you weigh the shipment, and Estes says to include the height of the pallet in the total height. Measure the finished piece at its longest, widest and tallest points, after the stretch wrap is on. A carton that hangs 1 in over the pallet edge adds that inch.

Can I type centimetres and kilograms?

Yes. Switch the size to centimetres and the weight to kilograms above the first line. The freight class calculator converts to inches and pounds, shows the conversion in the working, and gives the density in pounds per cubic foot, because that is the unit of the NMFC scale. A pallet of 120 by 80 by 100 cm at 250 kg is 16.26 lb per cubic foot, class 70.

Can I work out the freight class of several pallets at once?

Yes. Add one line for each size of pallet, with the weight of one piece and the number of pieces. The freight class calculator adds the cubic feet and the pounds of all lines and divides the two totals, so the class is for the whole shipment. Each line also shows the class it would have by itself.

What changed in the freight classes in 2025?

The density scale grew from 11 steps to 13 on 19 July 2025, under NMFTA Docket 2025-1. Two classes were added for dense freight: class 55 from 35 lb per cubic foot and class 50 from 50 lb per cubic foot. A calculator that still uses the old scale can give a different class for the same pallet, so check which scale a tool uses before you copy its answer.

Is the freight class the same as the NMFC code?

Not quite. The freight class is one of 18 numbers from 50 to 500, and some carrier pages call it the NMFC code. The NMFC item number is a different number: it names the kind of goods, and each item has its own class or its own density rule. The freight class calculator gives the class on the density scale and does not look up an item number.

What NMFC number do I put on the quote form?

The NMFC item number for your goods. NMFTA publishes the NMFC digitally as ClassIT+, where access is by subscription. ArcBest says a correct NMFC item number helps the quote match the price on the freight invoice. FedEx Freight tells shippers with classification questions to contact its customer support or NMFTA.

By The eancheck teamPublished

Questions or corrections? Email the eancheck team.