CBM Calculator
You have cartons and the forwarder asks for the CBM. Type the size and the number: the calculator gives the cubic metres, the cubic feet and how much of a 20 ft or 40 ft container they fill.
By The eancheck teamPublished
Measure the outside of one carton, crate or loaded pallet. The weight is optional.
Using an AI assistant?
How to calculate CBM · CBM to CFT · How many CBM in a 20 ft and a 40 ft container · CBM to kg
CBM is the volume of a shipment in cubic metres
CBM stands for cubic metre, spelled cubic meter in the USA. Flexport's freight glossary defines it as a volume one metre wide by one metre long by one metre high. A forwarder asks for it because the price of a sea shipment below a full container, called LCL for less than container load, is set per cubic metre or per tonne, whichever is larger.
The same figure answers a second question: how much of a container the goods take. A 20 ft container holds about 33 cubic metres and a 40 ft container about 67. A shipment of 12 CBM fills about a third of a 20 ft container, so it can go as part of a shared container (LCL). A shipment that books a whole container is FCL, for full container load.
CFT is the same idea in cubic feet, the unit US freight class works in. The calculator shows both units for every shipment.
How to calculate CBM
Multiply the length, the width and the height of one piece in metres. Multiply the result by the number of pieces. For sizes in centimetres, multiply the three numbers and divide by 1 000 000. Ten cartons of 60 by 40 by 50 cm are 1.2 CBM.
The formula for CBM is:
CBM = length × width × height in metres × number of pieces
Take ten cartons of 60 by 40 by 50 cm, the first example in the calculator:
| Step | Working | Result |
|---|---|---|
| Volume of one carton in cubic centimetres | 60 × 40 × 50 | 120 000 |
| Volume of one carton in cubic metres | 120 000 ÷ 1 000 000 | 0.12 |
| Volume of the shipment in cubic metres | 0.12 × 10 | 1.2 |
| Volume in cubic feet | 1.2 ÷ 0.028316846592 | 42.38 |
Measure the outside of the piece as it ships: the carton, not the product inside it, and a pallet with its load and its wrap. For a shipment with several sizes, work out each size and add the cubic metres. The calculator does this when you add a line.
Sizes in inches or feet convert without rounding. The inch is 0.0254 m and the foot is 0.3048 m, and the NIST conversion table marks both factors as exact. A cubic inch is therefore 0.000016387064 cubic metres. Five cartons of 24 by 18 by 12 in are 25 920 cubic inches, which is 15 cubic feet or 0.425 CBM.
CBM to CFT: one cubic metre is 35.3147 cubic feet
To convert CBM to CFT, multiply by 35.3147; to convert CFT to CBM, multiply by 0.0283168. The second factor is 0.3048 × 0.3048 × 0.3048 = 0.028316846592, and the calculator uses it in full.
| Cubic metres (CBM) | Cubic feet (CFT) |
|---|---|
| 0.5 | 17.66 |
| 1 | 35.31 |
| 2 | 70.63 |
| 5 | 176.57 |
| 10 | 353.15 |
| 20 | 706.29 |
| 33.2 | 1 172.45 |
| 67.7 | 2 390.80 |
US truck freight uses cubic feet for one more sum: pounds divided by cubic feet is the density that sets the class of a shipment. For a pallet that moves by road in the USA, the freight class calculator takes the same sizes and gives the class.
How many CBM fit in a 20 ft and a 40 ft container
A 20 ft dry container holds about 33.2 cubic metres, a 40 ft container 67.7, a 40 ft high cube 76.4 and a 45 ft high cube 86.0. These are the figures printed most often, and the calculator uses them. The table shows the range of figures we read on 16 November 2026 on the pages of Maersk, CMA CGM, Hapag-Lloyd, MSC, ONE, Evergreen, Triton and Textainer.
| Container | Typical capacity | Range printed | In cubic feet | Inside length × width × height | Door width × height |
|---|---|---|---|---|---|
| 20 ft | 33.2 m³ | 33.04 to 33.2 m³ | 1 172 | 5.898 × 2.352 × 2.393 m | 2.340 × 2.280 m |
| 40 ft | 67.7 m³ | 67.34 to 67.8 m³ | 2 390 | 12.032 × 2.352 × 2.393 m | 2.340 × 2.280 m |
| 40 ft high cube | 76.4 m³ | 75.95 to 76.4 m³ | 2 698 | 12.032 × 2.352 × 2.698 m | 2.340 × 2.585 m |
| 45 ft high cube | 86.0 m³ | 86.0 m³ | 3 037 | 13.556 × 2.352 × 2.698 m | 2.340 × 2.585 m |
The cubic feet are the typical capacity divided by 0.028316846592 and rounded down. The inside sizes are the ones Triton prints for the 20 ft, the 40 ft and the 40 ft high cube, and Textainer for the 45 ft high cube.
Why two carriers print two capacities
The standard fixes the outside of a container and sets only a minimum for the inside. ISO 668 classifies containers by their external dimensions and gives minimum internal and door opening dimensions for certain types. Each builder decides the wall and the floor, so the inside differs by a few millimetres. Triton prints 12 032 by 2 352 by 2 393 mm inside a 40 ft container. Textainer prints 12 025 by 2 348 by 2 385 mm. That is the difference between 67.7 and 67.34 cubic metres.
The owners and forwarders say so themselves. Triton notes that a difference in measurement is possible due to production tolerances, CMA CGM calls its figures non-contractual, and DSV writes that dimensions may vary with the manufacturer, the age of the container and its owner. For a load planned to the last carton, ask the carrier for the inside size of the container it will send.
Weight can fill a container before volume does
A container has a maximum payload, and dense goods reach it first. For a 20 ft container Hapag-Lloyd prints 28 130 kg and Triton 28 380 kg. A 40 ft container carries about the same weight in twice the space: the printed payloads run from 26 480 to 28 960 kg. The calculator warns when the weight you typed is above the lowest of these figures. Maersk notes that weight limits can vary by country.
Words a forwarder uses: LCL, FCL, HC and W/M
A freight quote is written in short codes. The meanings below follow the glossaries of the forwarders Dimerco and Mainfreight and the pages of IATA, DHL, UPS, Maersk, CMA CGM and Freightos, read on 16 November 2026.
| Word | What it means |
|---|---|
| CBM | Cubic metre: a volume of 1 m by 1 m by 1 m, which is 35.3147 cubic feet. |
| CFT | Cubic feet. One CFT is 0.0283168 CBM. |
| LCL | Less than container load: a sea shipment that does not fill a container and shares one with cargo from other shippers. |
| FCL | Full container load: the shipper books the whole container, and the price is per container. |
| 20'ST, 40'ST, 40'HC, 45'HC | The length in feet, then ST for a standard container or HC for a high cube, as CMA CGM writes them. Mainfreight writes GP, general purpose, for a standard container. |
| High cube (HC) | A container 9 ft 6 in tall outside instead of 8 ft 6 in, so about 30 cm taller inside. |
| W/M | Weight or measure: the price follows the weight in tonnes or the volume in CBM, whichever is greater. |
| Revenue ton (R/T) | A billing unit for LCL: the larger of the CBM and the weight in tonnes. |
| Chargeable weight | The weight the carrier bills: the larger of the real weight and the volumetric weight. |
| Volumetric weight | Also called dimensional weight: the volume of the shipment turned into kilograms with a divisor. |
| Divisor | The figure the volume is divided by to give the volumetric weight, 6 000 for air under the IATA general rule. UPS calls it the DIM factor. |
| Payload | The most cargo, by weight, that a container may carry. Maersk prints it as the maximum payload. |
A shipment that fits by volume may not fit by size
Volume says how much space the cartons take. It does not say that they go in. 275 cartons of 60 by 40 by 50 cm are 33.0 cubic metres, which is 99.4% of a 20 ft container. Stacked upright, 51 cartons cover the floor and 4 layers reach the roof, so 204 go in. The other 71 need a second container. iContainers, a freight forwarder, puts the rule in one line: nominal internal volume is not guaranteed usable space.
The calculator gives both answers for a shipment of one size. "Filled" is the volume divided by the capacity. "Fit by size" counts whole pieces: every piece stands the same way up, the rows on the floor run one of two ways, and the layers go up to the roof. With "stay upright" the height you typed stays the height. With "may lie on a side" the calculator tries all three ways up, and the same carton reaches 210 in a 20 ft container.
For pallets the count matches the figures Triton and CMA CGM print. A Euro pallet is 800 by 1 200 mm. The calculator puts 11 on the floor of a 20 ft container, 4 lengthwise and 7 crosswise, and Triton gives the same 11 Euro pallets per layer on its 20 ft page. In a 45 ft high cube it puts 27, the number CMA CGM gives per layer for a standard 45 ft container. For a 40 ft container the calculator's own count is 25.
The count is an estimate. A load plan with more patterns can hold more. Pallets that cannot carry each other take one layer, where the calculator stacks two when the height allows. A piece must also pass the door, which is lower than the inside: 2.280 m against 2.393 m on a 20 ft container.
CBM to kg: the chargeable weight depends on the carrier
For billing, 1 CBM counts as 1 000 kg for sea freight below a full container (LCL), 166.67 kg for air freight and 200 kg for courier. That figure is the volumetric weight, also called dimensional weight. The carrier charges the larger of the volumetric weight and the real weight, so a cubic metre has no fixed weight.
| Transport | Rule | 1 CBM counts as | Who publishes it |
|---|---|---|---|
| Air freight | cm³ ÷ 6 000 = kg | 166.67 kg | IATA, as the general rule |
| Courier and express | cm³ ÷ 5 000 = kg | 200 kg | DHL Express, FedEx |
| Sea freight, less than a container load | The larger of CBM and tonnes | 1 000 kg | Maersk, DHL Global Forwarding |
| Road freight in Europe | CBM × 333 = kg | 333 kg | DSV France, as the market norm; Blue Water Shipping |
| Rail freight | cm³ ÷ 3 000 = kg | 333.33 kg | DHL Global Forwarding |
A carrier turns the volume into a volumetric weight with a divisor. The divisor is the carrier's own price rule. Type a weight in the calculator to see the three common cases, and type your carrier's divisor to see a fourth.
Take the ten cartons again: 1.2 CBM and 120 kg. By air the volume counts as 1 200 000 ÷ 6 000 = 200 kg, so the chargeable weight is 200 kg. A courier with a divisor of 5 000 gives 240 kg. At sea the shipment is 1.2 CBM against 0.12 tonnes, so it counts as 1.2 units. Forwarders call that unit a revenue ton or write W/M, for weight or measure.
IATA describes dividing by 6 000 as the general rule for air cargo. DHL Express divides by 5 000 and says the divisor can change. FedEx divides by 5 000 in centimetres and kilograms, or by 139 in inches and pounds. UPS uses 139 for its daily rates and 166 for its retail rates, in inches and pounds. In metric units those are about 5 022 and 5 997.
For sea freight, Maersk's LCL terms count the gross volume or the gross weight, whichever is higher, with 1 CBM equal to 1 000 kg. A full container (FCL) is priced per container, so this rule applies only to shared ones. Freightos writes that an LCL shipment is charged for at least 1 CBM, and Mainfreight gives 1 CBM or 1 tonne as the smallest LCL shipment. Maersk's terms set a minimum cargo quantity of 1 WMU (weight and measure unit) in the clause for an agreement filed with the US Federal Maritime Commission.
Road freight has no single rule. DSV France gives 333 kg per cubic metre as the market norm, and the road tariff of Blue Water Shipping prints 333 kg for the Continent, the UK and Ireland, and Norway, Sweden and Finland, but 250 kg inside Denmark. DHL Global Forwarding writes that road ratios vary by location and carrier. Ask the haulier, and type the figure as a divisor: 333 kg per cubic metre is a divisor of 3 003.
The calculator does not round the way a tariff does. FedEx Canada and UPS round each size up to the next whole inch, and both raise the result to the next whole pound. FedEx Canada does the same in centimetres and kilograms. Use the figure to compare ways of transport, and take the invoice weight from the carrier's quote.
Frequently asked questions
How do I calculate CBM?
Multiply the length, the width and the height of one carton in metres, then multiply by the number of cartons. A carton of 60 by 40 by 50 cm is 0.6 × 0.4 × 0.5 = 0.12 cubic metres, so ten of them are 1.2 CBM. With sizes in centimetres, multiply the three numbers and divide by 1 000 000. With inches, multiply the cubic inches by 0.000016387064.
What does CBM stand for?
Cubic metre, written cubic meter in US spelling. In shipping, CBM is the volume of a shipment: length × width × height of one piece in metres, times the number of pieces. Forwarders price sea freight in a shared container (LCL) by it. In cubic feet the same volume is written CFT.
What is 1 CBM equal to?
One CBM is 1 cubic metre: 1 000 litres, 35.3147 cubic feet or 61 023.7 cubic inches. As a billing weight it depends on the transport. One cubic metre counts as 1 000 kg in Maersk's terms for sea freight below a full container, as 166.67 kg under the IATA general rule for air freight, and as 200 kg with the divisor of 5 000 that DHL Express uses.
What size is 1 CBM?
A cube of 1 m on each side, or any box with the same volume: 2 m by 1 m by 0.5 m, for example. A Euro pallet of 120 by 80 cm reaches 1 CBM when it is loaded to a height of about 104 cm, with the pallet. Eight cartons of 50 by 50 by 50 cm are 1 CBM, and so are 125 cartons of 20 by 20 by 20 cm.
How many kg is 1 CBM?
1 000 kg at sea, 166.67 kg by air and 200 kg by courier, as a billing weight. A cubic metre of goods has no fixed weight, so the rule comes from Maersk for a shared container, IATA for air cargo and DHL Express for courier. The bill uses the higher of this figure and the weight on the scale.
How much is 100 kg in CBM?
100 kg is 0.1 CBM at sea, because 1 CBM counts as 1 000 kg for a shipment below a full container. By air, under the IATA general rule of 6 000, 100 kg matches 0.6 CBM. With the courier divisor of 5 000 it matches 0.5 CBM. A shipment of 100 kg that takes more space than that is billed by its volume, not by its weight.
How many CBM fit in a 20 ft container?
About 33 CBM by volume. Maersk, CMA CGM, Hapag-Lloyd and Triton print 33.2 cubic metres for a 20 ft dry container, ONE prints 33.1 and Textainer 33.04. A real load holds less, because cartons leave gaps at the walls and under the roof. Of a carton of 60 by 40 by 50 cm, 276 fit by volume and 204 by size when the cartons stay upright.
What is the maximum capacity of a 20 ft container?
33.2 cubic metres is the typical figure for a 20 ft dry container, and the CBM calculator uses it. The maximum payload runs from 28 130 kg at Hapag-Lloyd to 28 380 kg at Triton. Goods heavier than about 850 kg per cubic metre reach that weight before they fill the space.
How many CBM fit in a 40 ft container?
About 67 CBM in a standard 40 ft container and about 76 CBM in a 40 ft high cube. Triton, Maersk and Hapag-Lloyd print 67.7 cubic metres for the 40 ft, CMA CGM prints 67.8 and Textainer 67.34. For the high cube, most carriers print 76.4. A 40 ft container holds a little more than two 20 ft containers, but its payload in kilograms is about the same.
How do I convert CBM to CFT?
Multiply the cubic metres by 35.3147 to get cubic feet. 1.2 CBM is 42.38 CFT. To go from cubic feet to cubic metres, multiply by 0.0283168: 15 CFT is 0.425 CBM. The full factor, 0.028316846592, is exact, because the foot is defined as 0.3048 m. The CBM calculator shows both units for every shipment.
Why do fewer cartons fit than the volume allows?
Because a container is a box with fixed sides, and cartons cannot fill the last gap at a wall or under the roof. 275 cartons of 60 by 40 by 50 cm are 33.0 cubic metres, under the 33.2 of a 20 ft container, but only 204 go in upright: 51 on the floor in 4 layers. The CBM calculator shows both counts, and the door and the payload can lower the number again.
By The eancheck teamPublished
Questions or corrections? Email the eancheck team.